For Cars

YAK 5 INDUSTRIAL HYDAULIC WINCH 5000LBS

Suppliers

DESCRIPTION

 

 

 

 

EXCLUSIVE REPRESENTATIVES OF COME UP TAIWAN!!

Yak 5

  • 5,000 lb Hydraulic Worm Gear Winch
  • Powered by an onboard hydraulic pump or PTO
  • Fast and variable recovery speeds for high working rate
  • High efficient and constant-operating torque motor
  • Irreversible single stage worm gear provides instant braking and slip free operation
  • An ergonomic T-handle for rapid wire rope payout
  • Heavy duty roller fairlead with grease zerk fittings
  • EN 14492-1 supported: 10:1 D/d ratio, 2:1 wire rope strength and 1.5d freeboard for severe duty car and commercial recovery
  • Standard Compliance: CE Machinery Directive 2006/42/EC, EN 14492-1:2006 Power Driven Winches and SAE J706

Specification/Part Numbers

  • Part number: PN 681330 (Std. drum)  / PN 681350 (Long drum)
  • Rated line pull: 2,268 kg / 5,000 lb (SAE J706 rating)
    2,200 kg (EN 14492-1 rating)
  • Line speed (at 1st layer of rope) : 4.4 mpm at 45 l/min (14.4 fpm at 11.9 g/min)
  • Operation pressure: 60 bar / 870 psi
  • Max oil flow: 45 l/min (11.9 g/min)
  • Hydraulic motor: 51.7 cm3/rev (3.2 in3/rev)
  • Gear ratio: 1-stage planetary gear 50:1
  • Winch construction: Aluminum die cast housings with steel drum
  • Clutch (Freespooling): Worm gear disengaged
  • Brake: Irreversible worm gear
  • Rotation of winch: Wire rope shall be under-wound orientation only
  • Drum barrel diameter: 72 mm (2.8″)
  • Drum flange diameter: 168 mm (6.6”)
  • Distance between flanges: 160 mm (6.3″) – Std. drum
    240 mm (9.5″) – Long drum
  • Mounting bolts pattern: 130 x 211 mm (5.1 x 8.3”) – Std. drum
    130 x 291 mm (5.1” x 11.5”)  – Long drum
  • Wire rope recommended:
    *8 mm x 25.5 m for Std. drum and 38.6 m for Long drum, 1,960 N/mm2 grade with a minimum breaking strength of 44.7 kN required for EN 14492-1 rating.
    *5/16″ x 112.5′ for Std. drum and 170.3′ for Long drum, EIPS grade with a minimum breaking strength of 10,030 lbf required for SAE J706 rating
  • Winch weight: 26 kg / 59.3 lb – Std. drum
    29 kg / 63.9 lb – Long drum
  • Gross weight : 30 kg / 66.1 lb  – Std. drum
    33 kg / 72.8 lb – Long drum
  • Box dimension, (L x D x H) : 431 x 386 x 256 mm (17″ x 15.2″ x 10.1″)  – Std.drum
    511 x 386 x 256 mm (20.1″ x 15.2″ x 10.1″) -Long drumCompliant with EN 14492-1 requirements for vehicle recovery winch:
    * The working coefficient for the first rope layer on the drum shall be at least 2.
    * The D/d ratio to the center of the rope shall be at least 10 for the drum.

Performance Data: 

Line Pull and Rope Capacity Line Speed
Layer of Wire Rope
Pull by layer,
kg / lb
Total Rope on the Drum, m / ft
at 40 l/min (10.6 g/min),
mpm / fpm
Std. drum
Long drum
1st
2,268 / 5,000
4.9 / 16.1
 7.4 / 24.3 4.4 / 14.4
2nd
1,890 / 4,167
10.8 / 35.4
16.2 / 53.5 5.3 / 17.4
3rd
1,620 / 3,571
17.6 / 57.7
26.7 / 87.6 6.1 / 20
4th
1,418 / 3,126
25.5 / 83.7
38.6 / 126.6 7 / 23
5th
1,260 / 2,778
34.3 / 112.5
51.9 / 170.3 7.9 / 25.9

Warning
* The winch is not intended to be used in any manner for the movement or lifting of personnel.
* The rated line pull shown is based on the first layer of rope on the drum.
* The rope winding on the drum shall remain 5 wraps from the drum.

Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.

 

 

Accessory:

Standard Accessories Option Accessories
  • Roller fairlead:
    PN  881479    149 mm throat for Yak 5 Std. drum
    PN  881480     229 mm throat for Yak 5 Long drum
  • Cable tensioner:
    PN 881236  for Yak 5 Std. drum
    PN 881237  for Yak 5 Long drum

Suppliers

Form of interest


Please fill in the fields below and we will contact you soon.

* Mandatory fields

Contact

Form of interest


Please fill in the fields below and we will contact you soon.

* Mandatory fields