
Спецификации / Номера на части
Капацитет на повдигане: 5000 кг при горния слой на въжето
Скорост на повдигане:
Опция А: 8 – 12,2 м / мин
Вариант Б: 5.3 – 8 м / мин
Източник на захранване: 3 фази, 380-440V
Клас на двигателя IP54:
Опция A: Мотор с индукционна спирачка с мощност 11 кW x 4 полюса
Вариант Б: Мотор с индукционна спирачка с мощност 7,5 к.т.
Съотношение на предавките: 197: 1
Максимална височина на повдигане: 192 м
Методи на спиране: Електромагнитни
Проводник: 22,4 мм х 200 м
Дължина на барабана: 680 мм
Диаметър на барабана: 324 мм
Диаметър на фланеца: 570 мм
Схема на монтажните болтове: 920 мм х 680 мм
Нето тегло, kg (стандартна версия): 1,380 кг
Бруто тегло: 1,465 кг
Размер на тялото (L x D x H): 1860 x 740 x 905 mm
Размер на кутията (L x D x H): 2,040 х 840 х 1,170 мм
Оценките за по-висока производителност се основават на 50 Hz доставка. (60Hz двигател е наличен като опция, което води до намаляване на капацитета за повдигане с 20% и увеличение на скоростта от 20%
Lifting Capacity, Lifting Speed and Rope Capacity:
Layer of Wire rope
|
Lifting Capacity, kg
|
Lifting Speed, m / min
|
Total Rope on the Drum, m |
A
|
B
|
1st
|
7,587
|
8
|
5.3
|
32 |
2nd
|
6,718
|
9.1
|
5.9
|
68 |
3rd
|
6,028
|
10.1
|
6.6
|
108 |
4th
|
5,466
|
11.1
|
7.3
|
153 |
5th
|
5,000
|
12.2
|
8
|
200 |
Note:.Above performance ratings are based on 50Hz supply.
Pulling Load Capacity for Various Inclines in kg
Model
|
Level Surface
|
Gradient % inclines / angle in degrees
|
10% 60°
|
20% 11°
|
40% 22°
|
|
80% 39°
|
CWG-34000
|
41,670
|
22,330
|
16,200
|
10,360
|
8,090
|
6,920 |
Note:
1. All rating are based on the top layer. For each layer reduction on the drum pulling capacity is increased by 10%
2. Use a snatch block for double line operation, to increase line pull by approximately 85%
3. The pulling capacities are based on a pulling load and 15% has been allowed for friction (specific applications will vary)
Warning
The winch is not intended to be used in any manner for the movement or lifting of personnel.
The rated lifting capacity shown is based on the top rope layer on the drum
The rope winding on the drum shall remain 5 wraps from the drum
Warranty
Each new winch is guaranteed against defects in workmanship and material defects for a period of twelve months from date of purchase.
WIRE ROPES ARE NOT INCLUDED UNDER WARRANTY.
Dimension, mm/in: